A Lunar Printer Experiment on Laser Fusion of the Lunar Regolith in the Luna-Grunt Space Project

T. M. Tomilina; Томилина Т. М.; A. A. Kim; Ким А. А.; D. I. Lisov; Лисов Д. И.; A. M. Lysenko; Лысенко А. М.

doi:10.31857/S0023420622600313

A Lunar Printer Experiment on Laser Fusion of the Lunar Regolith in the Luna-Grunt Space Project

Autores: Tomilina T.M.¹, Kim A.A.¹, Lisov D.I.², Lysenko A.M.¹
Afiliações:
1. Blagonravov Institute of Mechanical Engineering, Russian Academy of Sciences, 101990, Moscow, Russia
2. Space Research Institute, Russian Academy of Sciences, 117997, Moscow, Russia
Edição: Volume 61, Nº 4 (2023)
Páginas: 311-321
Seção: Articles
URL: https://rjmseer.com/0023-4206/article/view/672633
DOI: https://doi.org/10.31857/S0023420622600313
EDN: https://elibrary.ru/ULNKTA
ID: 672633

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Acesso é pago ou somente para assinantes

Resumo

This paper presents the results of laboratory studies on the use of a new technology of selective laser melting to obtain experimental products from the lunar regolith without special additives. The main properties of the natural regolith, which significantly affect the fusion process, are determined. The first samples of a given geometry were obtained from labradorite and gabbro-diabase powders, which are natural analogues of lunar regolith, using this technology. The research results are planned to be used in the preparation of initial data for the development of the Lunar Printer space device as part of the complex of scientific equipment of the promising lunar project Luna-Grunt.

Bibliografia

Митрофанов И.Г. Об освоении Луны. Русский космизм, лунная гонка и открытие “новой Луны” // Земля и Вселенная. 2019. № 1. С. 5–17. https://doi.org/10.7868/S0044394819010018
Митрофанов И.Г., Зеленый Л.М. Об освоении Луны. Планы и ближайшие перспективы // Земля и Вселенная. 2019. № 4. С. 16–37. https://doi.org/10.7868/S0044394819040029
Feldman W.C., Maurice S., Binder A.B. et al. Fluxes of fast and epithermal neutrons from Lunar Prospector: Evidence for water ice at the lunar poles // Science. 1998. V. 281. Iss. 5382. P. 1496–1500. https://doi.org/10.1126/science.281.5382.149
Pieters C.M., Goswami J.N., Clark R.N. et al. Character and spatial distribution of OH/H2O on the surface of the Moon seen by M3 on Chandrayaan-1 // Science. 2009. V. 326 Iss. 5952. P. 568–572. https://doi.org/10.1126/science.1178658
Mitrofanov I.G., Sanin A.B., Boynton W.V. et al. Hydrogen Mapping of the Lunar South Pole Using the LRO Neutron Detector Experiment LEND // Science. 2010. V. 330. Iss. 6003. P. 483–486. https://doi.org/10.1126/science.1185696
Colaprete A., Schultz P., Heldmann J. et al. Detection of water in the LCROSS ejecta plume // Science. 2010. V. 330. Iss. 6003. P. 463–468. https://doi.org/10.1126/science.1186986
Petro N.E., Pieters C.M. Surviving the heavy bombardment: Ancient material at the surface of South Pole–Aitken Basin // J. Geophys. Res. Atmos. 2004. V. 109. Art. ID. E06004. https://doi.org/10.1029/2003JE002182
Cesaretti G., Dini E., Kestelier X.D. et al. Building components for an outpost on the Lunar soil by means of a novel 3D printing technology // Acta Astronaut. 2014. V. 93. P. 430–450. https://doi.org/10.1016/j.actaastro.2013.07.034
Taylor S.L., Jakus A.E., Koube K.D. et al. Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks// Acta Astronaut. 2018. V. 143. P. 1–8. https://doi.org/10.1016/j.actaastro.2017.11.005
Goulas A., Binner J.G.P., Engstrom D.S. et al. Mechanical behaviour of additively manufactured lunar regolith simulant components // Proc IMechE Part L: J Materials: Design and Applications. 2018. V. 233. Iss. 8. P. 1629–1644.https://doi.org/10.1177/1464420718777932
Caprio L., Demir A.G., Previtali B. Determining the feasible conditions for processing lunar regolith simulant via laser powder bed fusion // Addit. Manuf. 2020. V. 32. Art. ID. 101029. https://doi.org/10.1016/j.addma.2019.101029
Kornuta D., Abbud-Madrid A., Atkinson J. et al. Commercial lunar propellant architecture: A collaborative study of lunar propellant production// Reach. 2019. V. 13. Art. ID. 100026. https://doi.org/10.1016/j.reach.2019.100026
Флоренский К.П. Лунный грунт: свойства и аналоги. М.: АН СССР. Ин-т геохимии и аналит. химии им. В.И. Вернадского, 1975.
Carrier W.D., Olhoeft G.R., Mendell W. Physical properties of the lunar surface // Lunar sourcebook: A user’s guide to the Moon. Cambridge: Cambridge Univ. Press, 1991. P. 475–594.
Taylor L.A., Pieters C.M., Britt D. Evaluations of Lunar Regolith Simulants// Planet. Space Sci. 2016. V. 126. P. 1–7. https://doi.org/10.1016/j.pss.2016.04.005
Slyuta E.N., Grishakina E.A., Makobchuk V.Y. et al. Lunar soil-analogue VI-75 for large-scale experiments // Acta Astronaut. 2021. V. 187. P. 447–457. https://doi.org/10.1016/j.actaastro.2021.06.047
Grugel R.N. Sulfur “concrete” for lunar applications – Sublimation concerns // Adv. Space Res. 2008. V. 41. Iss. 1. P. 103–112. https://doi.org/10.1016/j.asr.2007.08.018
Fateri M., Gebhardt A. Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications // Intern. J. Appl. Ceram. Technol. 2015. V. 12. Iss. 1. P. 46–52. https://doi.org/10.1111/ijac.12326
Goulas A., Friel R.J. 3D printing with moondust // Rapid Prototyp. J. 2016. V. 22. Iss. 6. P. 864–870.
Gerdes N., Fokken L.G., Linke S. et al. Selective Laser Melting for processing of regolith in support of a lunar base // J. Laser Appl. 2018. V. 30. Art. ID. 032018. https://doi.org/10.2351/1.5018576
Farries K.W., Visintin P., Smith S.T. et al. Construction of lunar masonry habitats using laser-processed bricks // 71st Intern. Astronautical Congress (IAC) – The CyberSpace Edition. 2020. IAC-20-E5.1.1 x58693. 11 p.
Balla V.K., Roberson L.B., O’Connor G.W. et al. First demonstration on direct laser fabrication of lunar regolith parts // Rapid Prototyp. J. V. 18. Iss. 6. P. 451–457. https://doi.org/10.1108/13552541211271992
Goulas A., Binner J.G.P., Harris R.A. et al. Assessing extraterrestrial regolith material simulants for in-situ resource utilisation based 3D printing // Appl. Mater. Today. 2017. V. 6. P. 54–61. https://doi.org/10.1016/j.apmt.2016.11.004