Damage indicators evolution during cyclic loading of composite plate with hole

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

Novel experimental method, which provides quantitative description of damage indicators evolution caused by fatigue loading of composite specimens with stress concentrators, was developed. Damage parameters are derived as deformation response to artificial notch inserting. This notch is extended from the edge of central through hole in plane rectangular specimen under constant external load. Current values of damage indicators are obtained at different stages of fatigue loading. These data reveal dependencies of required parameters on loading cycle number. The damage accumulation function for involved cycle range is quantitatively constructed on this base. It is found that this function is related to the first stage of the process investigated. The results obtained represent the essential link in the design of further experiments.

About the authors

A. S. Dzuba

Zhukovsky Central Aerohydrodynamic Institute

Author for correspondence.
Email: dzuba@tsagi.ru
Russian Federation, Zhukovsky, Moskovskaya obl.

S. I. Eleonsky

Zhukovsky Central Aerohydrodynamic Institute

Email: juzzepka@mail.ru
Russian Federation, Zhukovsky, Moskovskaya obl.

M. D. Zajtsev

Zhukovsky Central Aerohydrodynamic Institute

Email: zaytcev@list.ru
Congo, Zhukovsky, Moskovskaya obl.

V. S. Pisarev

Zhukovsky Central Aerohydrodynamic Institute

Email: VSP5335@mail.ru
Russian Federation, Zhukovsky, Moskovskaya obl.

References

  1. Grishin V.I., Dzyuba A.S., Dudakov Yu.I. Strength and stability of elements and joints of aircraft structures made of composites. Moscow: Fizmatlit Publishing House, 2013. 272 p. [in Russian]
  2. Golovan V.I., Grishin V.I., Dzyuba A.S. et al. Design, numerical analysis and static tests of metallic-composite structures. Moscow: Tekhnosfera, 2022. 408 p. [in Russian]
  3. Talreja R., Singh C.V. Damage and failure of composite materials. Cambridge University Press, 2012.
  4. Dimitrienko Yu.I., Sokolov A.P. Multi-scale modeling of elastic composite materials // Matematicheskoe modelirovanie. 2003. V. 24. № 5. P. 3–20 [in Russian].
  5. Moure M. M., Sanchez-Saez S., Barbero E., Barbero E.J. Analysis of damage localization in composite laminates using a discrete damage model // Composites Part B. 2014. V. 66. P. 224–232; https://doi.org/10.1016/j.compositesb.2014.05.015
  6. Dolgikh D.A., Tashkinov M.A. Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models // PNRPU Mechanics Bulletin. 2020. № 4. P. 74–85; https://doi.org/10.15593/perm.mech/2020.4.07
  7. Orifici A.C., Herszberg I., Thomson R.S. Review of methodologies for composite material modelling incorporating failure // Composite Structures. 2008. V. 86. № 1–3. P. 194–210; https://doi.org/10.1016/j.compstruct.2008.03.007
  8. Liu P., Xing L., Zheng J. Failure analysis of carbon fiber/epoxy composite cylindrical laminates using explicit finite element method // Composites Part B. 2014. V. 56. P. 54–61; https://doi.org/10.1016/j.compositesb.2013.08.017
  9. Zou Z., Reid S.R., Li S. A continuum damage model for delaminations in laminated composites // J. Mech. Phys. Solids. 2003. V. 51. P. 336–351.
  10. Maimi P., Camanho P.P., Mayugo J.A., Davila C.G. A continuum damage model for composite laminates: Part I – Constitutive model // Mechanics of Materials. 2007. V. 39. P. 897–908; https://doi.org/10.1016/j.mechmat.2007.03.005
  11. Maimi P., Camanho P.P., Mayugo J.A., Davila C.G. A continuum damage model for composite laminates: Part II – Computational implementation and validation // Mechanics of Materials. 2007. V. 39. P. 909–919; https://doi.org/10.1016/j.mechmat.2007.03.006
  12. Liu P.F., Zheng J.Y. Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics // Mater. Sci. Eng: A. 2008. V. 485. P. 711–717.
  13. Barbero E.J., Cortes D.H. A mechanistic model for transverse damage initiation, evolution, and stiffness reduction in laminated composites // Composites Part B. 2010. V. 41. P. 124–132; https://doi.org/10.1016/j.compositesb.2009.10.001
  14. Swindeman M.J., Iarve E.V., Brockman R.A., Mollenhauer D.H., Hallett S.R. Strength Prediction in Open Hole Composite Laminates by Using Discrete Damage Modeling // AIAA J. 2013. V. 51. P. 936–945; https://doi.org/10.2514/1.j051773
  15. Sun J., Huang L., Dai Y. Dynamic Response and Damage Accumulation of Laminated Composites under Repeated Low-Velocity Impacts // Materials. 2023. V. 16. P. 778–789; https://doi.org/10.3390/ma16020778
  16. Ajaja J., Barthelat F. Damage accumulation in a carbon fiber fabric reinforced cyanate ester composite subjected to mechanical loading and thermal cycling // Composites Part B. 2016. V. 90. P. 523–529; https://doi.org/10.1016/j.compositesb.2015.09.054
  17. Matvienko Yu.G., Pisarev V.S., Eleonsky S.I. Evolution of fracture mechanics parameters relevant to narrow notch increment as a measure of fatigue damage accumulation // Int. J. Fatigue. 2021. V. 149. 106310; https://doi.org/10.1016/j.ijfatigue.2021.106310
  18. Matvienko Yu.G., Pisarev V.S., Eleonsky S.I. Low-cycle fatigue damage accumulation near the cold-expanded hole by crack compliance data // Int. J. Fatigue. 2022. V. 155. 106590; https://doi.org/10.1016/j.ijfatigue.2021.106590
  19. Dzuba A.S., Eleonsky S.I., Pisarev V.S., Yashutin A.G. Influence of artificial notch length in composite material on damage indicator values // Technical Physics. 2023. V. 93. № 3. P. 371–379; https://doi.org/10.21883/JTF.2023.03.54848.272-22
  20. Pisarev V.S., Matvienko Yu.G., Eleonsky S.I., Odintsev I.N. Combining the crack compliance method and speckle interferometry data for determination of stress intensity factors and T-stresses // Eng. Fract. Mechan. 2017. V. 179. P. 348–374; https://doi.org/10.1016/j.engfracmech.2017.04.029
  21. Rabotnov Yu.N. Mechanics deformable of solid. Moscow: Nauka. The main editorial office, 1979. 743 p.
  22. Moskvitin V.V. Cyclic loading of structural elements. Moscow: Nauka, 1981. 344 p. [in Russian].
  23. Movchan A.A. Micromechanical approach to the problem of describing anisotropic scattered damages // Izv. AN SSSR. Mekh. Tv. Tela. 1990. № 3. P. 115–123 [in Russian].
  24. Movchan A.A. Mechanics of accumulation of scattered damages in structural elements: Textbook. Moscow: Izd. MAI, 1996. 64 p. [in Russian]
  25. Murakami S. Continuum Damage Mechanics. Springer Dordrecht Heidelberg London NY., 2012. 402 p.; https://doi.org/10.1007/978-94-007-2666-6
  26. Shanyavsky A.A. Models of the origin and development of fatigue failure under the surface of metals // Scientific bulletin of MGTU GA. 2012. V. 179. P. 32–44 [in Russian].
  27. Matvienko Yu.G., Pisarev V.S., Eleonsky S.I. Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution // Frattura ed Integrità Strutturale. 2022. V. 62. P. 541–560; https://doi.org/10.3221/IGF-ESIS.62.37
  28. D’Amore A., Grassia L., Ceparano A. Correlations between Damage Accumulation and Strength Degradation of Fiber Reinforced Composites Subjected to Cyclic Loading // Procedia Engineering. 2016. V. 167. P. 97–102; https://doi.org/10.1016/j.proeng.2016.11.674

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c) 2024 Russian Academy of Sciences