Assessment Possibility of Controlling Structure Formation by Changing the Technological Parameters LPBF Process

I. V. Shakirov; Шакиров И. В.; A. V. Olisov; Олисов А. В.; P. A. Kuznetsov; Кузнецов П. А.; A. S. Zhukov; Жуков А. С.

doi:10.31857/S0015323022601830

Assessment Possibility of Controlling Structure Formation by Changing the Technological Parameters LPBF Process

Authors: Shakirov I.V.¹, Olisov A.V.², Kuznetsov P.A.¹, Zhukov A.S.¹
Affiliations:
1. NRC “Kurchatov Institute” – CRISM “Prometey”
2. Tomsk State University
Issue: Vol 124, No 12 (2023)
Pages: 1271-1278
Section: СТРУКТУРА, ФАЗОВЫЕ ПРЕВРАЩЕНИЯ И ДИФФУЗИЯ
URL: https://rjmseer.com/0015-3230/article/view/663067
DOI: https://doi.org/10.31857/S0015323022601830
EDN: https://elibrary.ru/HLXZAL
ID: 663067

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract

—In this paper, the possibility of creating a controlled structure by varying the parameters of laser powder bed fusion (LPBF) process on the example of austenitic stainless steels is studied. Based on the study of the structure of experimental samples, the influence of a combination of various technological parameters that make up the scanning strategy when preparing a 3D-model for the LPBF process on the processes of structure formation is shown. The possibility of forming elements with different structures within one part during its manufacture by the LPBF method by changing the technological parameters of the process that make up the scanning strategy is shown. It is noted that the use of 3D-models identical in the geometry formed, but different in the strategy of scanning with a laser beam directly in the process of laser fusion, leads to the formation of a fundamentally different structure of the created sample, since the formation of the microstructure is strongly influenced by the conditions of metal crystallization, which directly depend on the scanning strategy.

Keywords

additive manufacturing, austenitic stainless steel, structure formation, 3D-model, laser powder bed fusion (LPBF)

References

Agrawal A.K., Bellefon G.M., Thoma D. High-throughput experimentation for microstructural design in additively manufactured 316L stainless steel // Mater. Sci. Eng.: A. 2020. V. 793. P. 139841. https://doi.org/10.1016/j.msea.2020.139841
Kuznetsov P.A., Shakirov I.V., Mozhayko A.A., Zhukov A.S., Bobyr V.V. Comparison of sequential and circular scanning thermal fields and their influence on microstructure of Alnico alloy produced by laser powder bed fusion // J. Phys.: Conference Series. 2021. V. 1967. № 1. P. 012064. https://doi.org/10.1088/1742-6596/1967/1/012064
Shakirov I.V., Zhukov A.S., Perevislov S.N., Olisov A.V. The Effect of Selective Laser Melting Conditions on the Structure of an Alnico Alloy // Phys. Met. Metal. 2022. V. 123. № 3. P. 227–237. https://doi.org/10.1134/S0031918X22030103
Shubo Gao, Zhiheng Hu, Martial Duchamp, Krishnan P.S.S.R., Tekumalla S., Song X., Seita M. Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting // Acta Mater. 2020. V. 200. P. 366–377. https://doi.org/10.1016/j.actamat.2020.09.015
Xiaofeng L., Denghao Y., Xiaoyu W., Jinfang Zh., Xiaohui Y., Zixuan Zh., Jianhong W., Bin L., Peikang B. Study on Mechanism of Structure Angle on Microstructure and Properties of SLM-Fabricated 316L Stainless Steel // Frontiers in Bioengineering and Biotechnology. 2021. V. 9. P. 778332. https://www.frontiersin.org/articles/https://doi.org/10.3389/fbioe.2021.778332. 10.3389/fbioe.2021.778332
Pham M.S., Dovgyy B., Hooper P.A., Gourlay C.M., Piglione A. The role of side-branching in microstructure development in laser powder-bed fusion // Nat. Commun. 2020. V. 11. P. 749. https://doi.org/10.1038/s41467-020-14453-3
Zhang S., Jahn A., Jauer L., Schleifenbaum J.H. Geometry-Based Radiation Prediction of Laser Exposure Area for Laser Powder Bed Fusion Using Deep Learning // Appl. Sci. 2022. V. 12. P. 8854. https://doi.org/10.3390/app12178854
Колмаков А.Г., Иванников А.Ю., Каплан М.А., Кирсанкин А.А., Севостьянов М.А. Коррозионностойкие стали в аддитивном производстве // Изв. вузов Черная Металлургия. 2021. Т. 64. № 9. С. 619–650. https://doi.org/10.17073/0368-0797-2021-9-619-650
Bahl S., Mishra S., Yazar K.U., Kola I.R., Chatterjee K., Suwas S. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel // Additive Manufacturing. 2019. V. 28. P. 65–77. https://doi.org/10.1016/j.addma.2019.04.016
Molnar B., Heigel J., Whitenton E. In Situ Thermography During Laser Powder Bed Fusion of a Nickel Super Alloy 625 Artifact with Various Overhangs // J. Res. Natl. Inst. Stan. 2021. V. 126. P. 126005. https://doi.org/10.6028/jres.126.005
Chernyshikhin S.V., Pelevin I.A., Karimi F., Shishkovsky I.V. The Study on Resolution Factors of LPBF Technology for Manufacturing Superelastic NiTi Endodontic Files // Mater. 2022. V. 15. P. 6556. https://doi.org/10.3390/ma15196556
Vrána R., Koutecký T., ˇCervinek O., Zikmund T., Pantelejev L., Kaiser J., Koutný D. Deviations of the SLM Produced Lattice Structures and Their Influence on Mechanical Properties // Mater. 2022. V. 15. P. 3144. https://doi.org/10.3390/ma15093144
Scalzo F., Totis G., Sortino M. Influence of the Experimental Setup on the Damping Properties of SLM Lattice Structures // Experimental Mechanics. 2023. V. 63. № 1. P. 17–28. https://doi.org/10.1007/s11340-022-00898-8
Loginov Yu.N., Stepanov S.I., Ryshkov N.M., Yudin A.V., Tretyakov E.V. Effect of SLM parameters on the structure and properties of CP-Ti // AIP Conference Proceedings. 2018. V. 2053. P. 040052. https://doi.org/10.1063/1.5084490
Peng K., Duan R., Liu Z., Lv X., Li Q., Zhao F., Wei B., Nong B., Wei S. Cracking Behavior of René 104 Nickel-Based Superalloy Prepared by Selective Laser Melting Using Different Scanning Strategies // Mater. 2020. V. 13. P. 2149. https://doi.org/10.3390/ma13092149
Cao Y., Bai P., Liu F., Hou X. Investigation on the Precipitates of IN718 Alloy Fabricated by Selective Laser Melting // Metals. 2019. V. 9. P. 1128. https://doi.org/10.3390/met9101128
Geiger F., Kunze K., Etter T. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies // Mater. Sci. Eng.: A. 2016. V. 661. P. 240–246. https://doi.org/10.1016/j.msea.2016.03.036