A study of primary recrystallization of highly permeable electrical anisotropic steel with additional alloying elements

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Acesso é pago ou somente para assinantes

Resumo

This study is devoted to the effect of alloying high-permeable electrical anisotropic steel with tin and chromium highly permeable electrical anisotropic steel with tin and chromium on the kinetics of primary recrystallization. The physical modeling of strongly deformed alloy specimens of different chemical composition is performed. The obtained recrystallization kinetics equations for alloys of different tin and chromium content show a deceleration of recrystallization process in a steel with an increased tin content and a decreased chromium content. Analysis of the texture at different stages of recrystallization allows making conclusion that the texture is formed predominately by oriented growth.

Texto integral

Acesso é fechado

Sobre autores

A. Roldugina

Novolipetsk Steel Company

Autor responsável pela correspondência
Email: rolduginaas@gmail.com
Rússia, Lipetsk, 398005

M. Ryazanov

Novolipetsk Steel Company

Email: rolduginaas@gmail.com
Rússia, Lipetsk, 398005

V. Parakhin

Bardin Central Research Institute of Ferrous Metals

Email: rolduginaas@gmail.com
Rússia, Moscow, 105005

Bibliografia

  1. Takahashi N., Harase J. Recent development of technology of grain oriented silicon steel // Mater. Sci. Forum. 1996. V. 204–206. № 1. P. 143–154.
  2. Kumano T., Haratani T., Ushigami Y. Influence of Primary Recrystallization Texture through Thickness to Secondary Texture on Grain Oriented Silicon Steel // ISIJ International. 2003. V. 43. № 3. P. 400–409.
  3. Nakashima S., Takashima K., Harase J., Takemasa A., Takimoto K. Effect of Sn Addition on Microstructure and Texture of Primarily Recrystallized 3 mass%Si Steel // J. Japan Institute Met. Mater. 1991. V. 55. № 12. P. 1400–1409.
  4. Suehiro R., Hayakawa Y., Takamiya T. Effect of Sn Addition on Evolution of Primary Recrystallization Texture in 3% Si Steel // ISIJ International. 2019. V. 59. № 2. P. 351–358.
  5. Gao Y., Xu G., Guo X., Li G., Wang Y. Primary recrystallization characteristics and magnetic properties improvement of high permeability grain-oriented silicon steel by trace Cr addition // J. Magn. Magn. Mater. 2020. V. 507. Р. 166849.
  6. Han K.-S., Park J.-T., Kim J.-K., Szpunar J.A. Evolution of the texture on primary recrystallization and grain growth in Fe-3%Si steels // Mater. Sci. Forum. 2007. V. 1. P. 747–750.
  7. Xu L., Liu Q., Song Y., Feng T., Li Z. Formation of the primary recrystallization texture in the oriented electrical steel with 3% Si // IOP Conference Series: Mater. Sci. Eng. 2018. V. 382. № 2.
  8. Fortunati S. On the metallurgical control of texture sharpness and related magnetic properties in grain-oriented silicon-iron // J. Magn. Magn. Mater. 1994. V. 133. № 1–3. P. 216–219.
  9. Harase J., Shimizu R., Kim J.-K., Woo J. The role of high energy boundaries and coincidence boundaries in the secondary recrystallization of grain-oriented silicon steel // Met. Mater. Intern. 1999. V. 5. № 5. P. 429–435.
  10. Liu G.-T., Liu Z.-Q., Yang P., Mao W.-M. Correlation between Primary and Secondary Recrystallization Texture Components in Low-temperature Reheated Grain-oriented Silicon Steel // J. Iron Steel Research. 2016. V. 23. № 11. P. 1234–1242.
  11. Лобанов М.Л., Редикульцев А.А., Русаков Г.М., Данилов С.В. Взаимосвязь ориентировок деформации и рекристаллизации при горячей прокатке электротехнической анизотропной стали // Металловедение и термич. обработка металлов. 2015. № 8. С. 44–49.
  12. Rodriguez-Calvillo P., Leunis E., Van De Putte T., Jacobs S., Zacek O., Saikaly W. Influence of initial heating during final high temperature annealing on the offset of primary and secondary recrystallization in Cu-bearing grain oriented electrical steels // AIP Advances. 2018. V. 8. № 4. Р. 047605.
  13. Mavrikakis N., Saikaly W., Calvillo P., Campos A., Jacomet S., Bozzolo N., Mangelinck D., Dumont M. How Sn addition influences texture development in single-phase Fe alloys: Correlation between local chemical information, microstructure and recrystallization // Mater. Characterization. 2022. V. 190. Р. 112072.
  14. Колмогоров А.Н. К статистической теории кристаллизации металлов // Изв. АН. СССР. Сер. математическая. 1937. Т. 1. № 3. С. 355–359.
  15. Avrami M. Kinetics of Phase Change. I General Theory // J. Chem. Phys. 1939. V. 7. P. 1103–1112.
  16. Akta S., Richardson G.J., Sellars C.M. Hot Deformation and Recrystallization of 3% Silicon Steel Part 1: Microstructure, Flow stress and Recrystallization Characteristics // ISIJ International. 2005. V. 45. № 11. P. 1666–1675.
  17. Zhang X. Precipitate evolution in grain oriented electrical steel and high strength low alloy steel [PhD Thesis]. University of Groningen, 2020.
  18. Torrens-Serra J., Venkataraman S., Stoica M., Kuehn U., Roth S., Eckert J. Non-Isothermal Kinetic Analysis of the Crystallization of Metallic Glasses Using the Master Curve Method // Materials. 2011. V. 4. № 12. P. 2231–2243.
  19. He C.-X., Ma G., Meng L., Yang F.-Y., Chen X. {411}<148> Texture in Thin-Gauge Grain-Oriented Silicon Steel // Acta Metal. Sinica (English Letters). 2016. V. 29. № 6. Р. 554–560.
  20. Tian X., Kuang S., Li J., Liu S., Feng Y. Effect of Holding Time of Decarbonization Annealing on Recrystallization in Fe-3.2%Si-0.047Nb% Low-Temperature Oriented Silicon Steel // Crystals. 2021. V. 11. № 10. Р. 1209.
  21. Humphreys F., Hatherly M. Chapter 12 — Recrystallization Textures / Recrystallization and Related Annealing Phenomena (Second Edition). 2004. P. 379–413.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2. Fig. 1. EBSD maps in inverse pole figure (IPF) colors showing the structure after heating to different temperatures for steel A (a–g) and steel B (d–h).

Baixar (71KB)
Metadados
3. Fig. 2. EBSD maps in inverse pole figure colors taken at 1/10 (a) and 1/2 (b) of the sample thickness.

Baixar (19KB)
Metadados
4. Fig. 3. Dependence of the proportion of recrystallized grains on the annealing duration for steels A and B according to calculated (lines) and experimental (symbols) values.

Baixar (20KB)
Metadados
5. Fig. 4. Sections of the FRO for recrystallization nuclei (a) and for coarse recrystallized grains (b) at temperatures of 650–690°C.

Baixar (19KB)
Metadados
6. Fig. 5. EBSD map in OPF colors from a sample heated to 740°C (a), and examples of the separation of small (b), medium (c), and large (d) grains from the original map (a).

Baixar (38KB)
Metadados
7. Fig. 6. Sections of the FRO with small (a), medium (b) and large (c) grains during recrystallization at a temperature of 700–740°C.

Baixar (27KB)
Metadados
8. Fig. 7. Section of the FRO obtained at the last stage of recrystallization at 740°C.

Baixar (13KB)
Metadados