Influence of Processing Conditions on the Properties of High Paraffin Oil and Sediment Composition

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The influence of ultrasonic treatment, a polymer additive, and their combined effect on the structural and rheological properties of high paraffin, low-resin oil and the composition of separated sediments is studied. The oil was processed in the ultrasonic field (with the field intensity of 6 W/cm2, the frequency of 22 kHz, and the time of 1–10 min). The sedimentation process was carried out at an ambient temperature of 30°С and a coldfinger temperature of 5°С. A Brookfield DV-III ULTRA rotary viscometer was used to determine the viscosity-temperature parameters of the oil. Ultrasonic treatment for 1 min and a polymer additive (0.05 wt%) leads to a decrease in the viscosity by a factor of 5 and in pour point by 8°C. The introduction of the additive and the complex effect contribute to changes of the molecular weight distribution of n-alkanes in the sediments, viz. the second distribution maximum shifts to the region of higher molecular weight components and the concentration of n-alkanes ∑С17Н36–С33 Н68 increases.

Толық мәтін

Рұқсат жабық

Авторлар туралы

G. Volkova

Institute of Petroleum Chemistry of Siberian Branch of the Russian Academy of Sciences; National Research Tomsk State University

Хат алмасуға жауапты Автор.
Email: galivvol@yandex.ru
Ресей, Tomsk; Tomsk

D. Zubarev

Institute of Petroleum Chemistry of Siberian Branch of the Russian Academy of Sciences

Email: zubarevdaniilandreevich@gmail.com
Ресей, Tomsk

Әдебиет тізімі

  1. Chala G.T., Sulaiman S.A., Japper-Jaafar A. // J. Non-Newtonian Fluid Mech. 2018. V. 251. P. 69. https://doi.org/10.1016/j.jnnfm.2017.11.008
  2. Гаррис Н.А., Полетаева О.Ю., Бакиев Т.А. // Транспорт и хранение нефтепродуктов и углеводородного сырья. 2020. № 3. С. 64. https://doi.org/10.24411/0131-4270-2020-10311 [Transport and Storage of Oil Products and Hydrocarbons, 2020, no. 3, p. 64. https://doi.org/10.24411/0131-4270-2020-10311].
  3. Ansari F., Shinde S. B., Paso K. G., Sjöblom J., Kumar L. // Energy & Fuels. 2022. V. 36. P. 3372. https://doi.org/10.1021/acs.energyfuels.1c03747
  4. Литвинец И.В., Юдина Н.В., Лоскутова Ю.В., Прозорова И.В. // Нефтяное хозяйство. 2018. № 2. С. 85. https://doi.org/10.24887/0028-2448-2018-2-85-89 [Oil industry, 2018, no. 2, p. 85.]
  5. Afra S., Hisham A., Nasr-El-Din H., Socci D., Zheng Cui. // Fuel. 2018. V. 220. P. 481. https://doi.org/10.1016/j.fuel.2018.01.111
  6. Казанцев О.А., Волкова Г.И., Прозорова И.В., Литвинец И.В., Орехов Д.В., Самодурова С.И., Каморин Д.М., Мойкин А.А., Меджибовский А.С. // Нефтехимия. 2016. Т. № 1. С. 76. https://doi.org/10.7868/S0028242115040073 [Petroleum Chemistry, 2016, vol. 56, no. 1, p. 68. https://doi.org/10.1134/S0965544115060079]
  7. Wang Z., Fang R., Guo H. Advances in ultrasonic production units for enhanced oil recovery in China // Ultrason. Sonochem. 2020. V. 60. P. 104791. https://doi.org/10.1016/j.ultsonch.2019.104791
  8. Hofstatter H., Pavlov M.V., Mastobaev B.N. // SOCAR Proc. 2014. № 4. P. 35. https://doi.org/10.5510/OGP20140400219 [Научные труды НИПИ Нефтегаз ГНКАР. 2014. № 4. С. 35. https://doi.org/10.5510/OGP20140400219].
  9. Abramov V.O., Abramova A.V., Bayazitov V.M., Altunina L.K., Gerasin A.S., Pashin D.M., Mason Timothy J. // Ultrasonics Sonochemistry. 2015. V. 25. P. 76. https://doi.org/10.1016/j.ultsonch.2014.08.014
  10. Cui J., Zhang Z., Liu X., Liu L., Peng J. // Fuel. 2020. V. 263. 116638. https://doi.org/10.1016/j.fuel.2019.116638
  11. Абрютина Н.Н., Абушаева В.В., Арефьев О.А. Современные методы исследования нефтей: Справочно-методическое пособие. Под ред. А.И. Богомолова, М.Б. Темянко, Л. И. Хотынцевой. Л.: Недра, 1984. 431 с.
  12. Морозова А.В., Волкова Г.И. // Химия в интересах устойчивого развития. 2020. № 28. С. 508. https://doi.org/10.15372/CSD20202570 [Chemistry for Sustain able Development, 2020, vol. 28, p. 494].
  13. Методика идентификации органических соединений в смесевых композициях синтетического и природного происхождения методом хроматомасс-спектрометрии. СТП СШЖИ 1232-2009, 2009. 3 с.
  14. Anufriev R.V., Volkova G.I. // Key Engineering Materials, 2016. V. 670. P. 55. https://doi.org/10.4028/scientific.net/KEM.670.55
  15. Ануфриев Р.В., Волкова Г.И. // Известия Томского политехнического университета. Инжиниринг георесурсов. 2016. Т. 327. № 10. С. 50. [Bulletin of the Tomsk Polytechnic University. Geo Аssets Engineering, 2016, vol. 327, no. 10, p. 50].

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Effect of RCD time on oil viscosity at 5°C

Жүктеу (98KB)
Метадеректер
3. Fig. 2. Effect of PP additive concentration on oil viscosity at different temperatures

Жүктеу (80KB)
Метадеректер
4. Fig. 3. Forward and reverse oil flow curves at 5°C

Жүктеу (112KB)
Метадеректер
5. Fig. 4. Molecular weight distribution of n-alkanes in oil sludge oils

Жүктеу (80KB)
Метадеректер

© Russian Academy of Sciences, 2024