Influence of Heat Treatment Conditions on the Composition of Cracking Products of Oil Shale from the Kashpir Deposit

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The cracking of oil shale from the Kashpir deposit was studied at various temperatures (425, 450, and 475°C) and process durations (40, 60, 80, and 100 min.). It was shown that the highest yields of liquid products and oils in their composition were achieved at a cracking temperature of 450°C and a duration of 100 min. An increase in the temperature and duration of cracking led to an increase in the concentration of С1–С5 hydrocarbons in the gaseous products by a factor of 2–5. Oils isolated from the liquid products of oil shale cracking consisted of 30–45% polycyclic aromatic hydrocarbons. It was established that an increase in the temperature and duration of cracking led to an increase in the concentration of IBP–360°C fractions in the composition of liquid products.

Авторлар туралы

M. Mozhayskaya

Institute of Petroleum Chemistry, Siberian Branch, Russian Academy of Sciences

Email: mozhayskaya@ipc.tsc.ru
Tomsk, 634055 Russia

G. Pevneva

Institute of Petroleum Chemistry, Siberian Branch, Russian Academy of Sciences

Email: pevneva@ipc.tsc.ru
Tomsk, 634055 Russia

E. Krivtsov

Institute of Petroleum Chemistry, Siberian Branch, Russian Academy of Sciences

Email: john@ipc.tsc.ru
Tomsk, 634055 Russia

P. Pantilov

Institute of Petroleum Chemistry, Siberian Branch, Russian Academy of Sciences

Хат алмасуға жауапты Автор.
Email: 6tinygamer10@gmail.com
Tomsk, 634055 Russia

Әдебиет тізімі

  1. Kang Z., Zhao Y., Yang D. // Appl. Energy. 2020. T. 269. P. 115121.
  2. Lu Y., Wang Y., Zhang J., Wang Q., Zhao Y., Zhang Y. // Energy. 2020. V. 200. P. 117529.
  3. Симонов В.Ф., Каширский В.Г., Левушкина Л.В. // Вестн. Саратовск. ун-та. 2008. № 1. С. 77–81.
  4. Рыжов А.Н., Авакян Т.А., Сахарова Е.А., Маслова Л.К., Смоленский Е.А., Лапидус А.Л. // ХТТ. 2013. № 4. С. 29. [Solid Fuel Chemistry. 2013. vol. 47, no. 2, p. 88–97. https://doi.org/10.3103/S0361521913020092]https://doi.org/10.7868/S0023117713020096
  5. Zendehboudi S., Bahadori A. // Gulf Professional Publishing. 2016. 426 p.
  6. Shawabkeh A.Q., Abdulaziz M. // Oil Shale. 2013. V. 30. № 2. P. 173.
  7. Гюльмалиев А.М., Каирбеков Ж.К., Малолетнев А.С., Емельянова В.С., Малтыкбаева Ж.К. // ХТТ. 2013. № 6. С. 49. [Solid Fuel Chemistry. 2013. vol. 47, no. 6, p. 360–364. https://doi.org/10.3103/S0361521913060037]https://doi.org/10.7868/S0023117713060030
  8. Yarboboev T., Sultanov Sh., Aminov F., Navotova D. // Bull. Sci. Pract. 2020. V. 6. No. 7. P. 226.
  9. Можайская М.В., Сурков В.Г., Копытов М.А., Головко А.К. // Журн. Сиб. фед. ун-та. Химия. 2019. Т. 12. № 3. С. 319.
  10. Певнева Г.С., Воронецкая Н.Г., Гринько А.А., Головко А.К. // Нефтехимия. 2016. Т. 56. № 5. С. 461. [Petroleum Chemistry, 2016, vol. 56, no. 8, p. 690–696. https://doi.org/10.1134/S0965544116080144]https://doi.org/10.7868/S0028242116050154

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
2.

Жүктеу (152KB)

© М.В. Можайская, Г.С. Певнева, Е.Б. Кривцов, П.В. Пантилов, 2023