Mechanical Characteristics of ABS Plastic After Microwave Irradiation

E. A. Lebedeva; Лебедева Е. А.; S. A. Astaf’eva; Астафьева С. А.; D. K. Trukhinov; Трухинов Д. К.; E. V. Kornilitsina; Корнилицина Е. В.; E. M. Nurullaev; Нуруллаев Э. М.

doi:10.31857/S0207401X23020103

Mechanical Characteristics of ABS Plastic After Microwave Irradiation

Авторлар: Lebedeva E.A.¹, Astaf’eva S.A.¹, Trukhinov D.K.¹, Kornilitsina E.V.¹, Nurullaev E.M.²
Мекемелер:
1. Institute of Technical Chemistry, Ural Branch, Russian Academy of Sciences, Perm, Russia
2. Perm National Research Polytechnic University, Perm, Russia
Шығарылым: Том 42, № 2 (2023)
Беттер: 83-87
Бөлім: Chemical physics of polymeric materials
URL: https://rjmseer.com/0207-401X/article/view/674905
DOI: https://doi.org/10.31857/S0207401X23020103
EDN: https://elibrary.ru/IXABJP
ID: 674905

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Рұқсат ақылы немесе тек жазылушылар үшін

Аннотация

The effect of microwave radiation treatment on the widely used technical acrylonitrile-butadiene-styrene (ABS) polymer widely used for 3D-printing is studied. The chemical structure and tensile strength characteristics of filled (with 3 wt % carbon fiber) and unfilled ABS plastic irradiated with microwave radiation for 300, 600, 900, and 1200 s are evaluated. It is shown that the effective irradiation time for the mechanical improvement of the filled samples is 300 s, while no significant changes in the mechanical characteristics of the initial ABS samples are found.

Негізгі сөздер

microwave radiation, ABS plastic, copolymer of acrylonitrile, butadiene and styrene, IR spectroscopy, mechanical stress, deformation

Әдебиет тізімі

Zhang M., Song X., Grove W. et al. // Proc. ASME 2016 11th Intern. Manufacturing Science and Engineering Conf. V. 3. Blacksburg, Virginia, USA: ASME, 2016. V003T08A007; https://doi.org/10.1115/MSEC2016-8790
Lebedeva E.A., Astaf’eva S.A., Istomina T.S. et al. // App. Surf. Sci. 2022. V. 602. 154251; https://doi.org/10.1016/j.apsusc.2022.154251
Ahmadreza A., Mohammad L., Jamal Ch. // Appl. Thermal Engin. 2021. V. 193. 117003; https://doi.org/10.1016/j.applthermaleng.2021.117003
Ferrari A., Hunt J., Lita A. et al. // J. Phys. Chem. C. 2014. V. 118. P. 9346; https://doi.org/10.1021/jp501206n
Zhou J., Xu W., You Z. et al. // Sci. Rep. 2016. V. 6. 25149; https://doi.org/10.1038/srep25149
Amini A., Maeda T., Ohno K., Kunitomo K. // ISIJ Intern. 2019. V. 59. P. 672; https://doi.org/10.2355/isijinternational.ISIJINT-2018-391
Жарова П.А., Чистяков А.В., Лесин С.В. и др. // Хим. физика. 2019. Т. 38. № 6. С. 35; https://doi.org/10.1134/S0207401X19060104
Li J., Chen F., Yang L. et al. // Spectroch. Acta, Part A. 2017. V. 184. P. 361; https://doi.org/10.1016/j.saa.2017.04.075
Ливанова Н.М., Хазова В.А., Правада Е.С. и др. // Хим. физика. 2022. Т. 41. № 7. С. 67; https://doi.org/10.31857/S0207401X2207010X
Шибряева Л.С., Люсова Л.Р., Карпова С.Г., Наумова Ю.А. // Хим. физика. 2022. Т. 41. № 4. С. 44; https://doi.org/10.31857/S0207401X22040070
De Paoli M.A. // Eur. Polym. J. 1983. V. 19. P. 761; https://doi.org/10.1016/0014-3057(83)90145-3
Guyader M., Audouin L., Colin X. et al. // Polym. Degrad. Stab. 2006. V. 91. P. 2813; https://doi.org/10.1016/j.polymdegradstab.2006.04.009
Tiganisa B.E., Burna L.S., Davisa P., Hill A.J. // Ibid. 2002. V. 76. P. 425; https://doi.org/10.1016/S0141-3910(02)00045-9
Левин П.П., Ефремкин А.Ф., Худяков И.В. // Хим. физика. 2020. Т. 39. № 6. С. 59; https://doi.org/10.31857/S0207401X20060059
Злобина И.В., Бекренев Н.В., Павлов С.П. // Вестн. ЮУрГУ. Сер. “Машиностроение”. 2017. Т. 17. № 4. С. 70; https://doi.org/10.14529/engin170407
Brostow W., Lobland H.E.H., Hnatchuk N., Perez J.M. // Nanomaterials. 2017. V. 7. P. 66; https://doi.org/10.3390/nano7030066
Chopra S., Pande K., S. Tupe P. et al. // Polym. Eng. Sci. 2021. V. 61. P. 3125; https://doi.org/10.1002/pen.25825
Нуруллаев Э.М. // Прикл. механика и техн. физика. 2021. Т. 62. № 2. С. 53; https://doi.org/10.15372/PMTF20210205
Исакова А.А., Грибкова О.Л., Алиев А.Д. и др. // Физикохимия поверхности и защита материалов. 2020. Т. 56. № 4. С. 406; https://doi.org/10.31857/S0044185620040129
Fonseca L.P., Waldman W.R., De Paoli M.A. // Composites Part C. 2021. V. 5. 100142; https://doi.org/10.1016/j.jcomc.2021.100142
Mishra R.R., Sharma A.K. // Composites Part A. 2016. V. 81. P. 78; https://doi.org/10.1016/j.compositesa.2015.10.035
Ливанова Н.М., Попов А.А. // Хим. физика. 2019. Т. 38. № 3. С. 64; https://doi.org/10.1134/S0207401X19020109