Study of the influence of fillers on the wettibility and cytotoxicity of polysiloxane films for medical use

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

A method for synthesis of two new types of polysiloxane-based films is proposed: with introduced chitosan and with introduced sodium bicarbonate with its subsequent removal. It was found that the obtained films have a branched internal structure of channels suitable for further filling with biologically active substances. The study of the hydrophobicity of the obtained films, in comparison with pure polysiloxane films, showed an insignificant (no more than 6%) decrease in the equilibrium wetting edge angle, as well as equalization of its values from the outer and inner sides, compared with films without modification. A comprehensive in vitro study demonstrated the promising use of polysiloxane films with introduced chitosan, since they do not have a reliable toxic effect on the studied cells. Films of pure polysiloxane and polysiloxane with the use of sodium hydrogen carbonate had a toxic effect on the investigated cells and acidified the medium. All samples were found to be non-adhesive to cells.

Full Text

Restricted Access

About the authors

А. S. Baikin

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Author for correspondence.
Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

E. O. Nasakina

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

G. А. Davydova

Institute of Theoretical and Experimental Biophysics of Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 142290, Pushchino

M. А. Sudarchikova

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

A. A. Melnikova

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

K. V. Sergienko

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

S. V. Konushkin

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

M. A. Kaplan

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow

M. A. Sevostyanov

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; All-Russian Research Institute of Phytopathology

Email: baikinas@mail.ru
Russian Federation, 119334, Moscow; 143050, Bolshiye Vyazemy, Moscow Region

A. G. Kolmakov

A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences

Email: baikinas@mail.ru

Corresponding Member of the RAS

Russian Federation, 119334, Moscow

References

  1. World Health Organization // https://www.who.int/en/news-room/fact-sheets/detail/the-top-10-causes-of-death (ссылка активна на 17.04.2024).
  2. Grüntzig A. // Lancet. 1978. V. 1. № 8058. P. 263.
  3. Anqiang S., Wang Z., Fan Z., Tian X., Zhan F., Deng X., Liu X. // Med. Eng. Phys. 2015 V. 37. P. 840–844. http s://doi.org/10.1016/j.medengphy.2015.05.016
  4. Sommer C., Gockner T., Stampfl U., Bellemann N., Sauer P., Ganten T., Weitz J., Kauczor H., Radeleff B. // Eur. J. Radiol. 2012. V. 81. P. 2273–2280. http s://doi.org/10.1016/j.ejrad.2011.06.037
  5. Doshi R., Shah J., Jauhar V., Decter D., Jauhar R., Meraj P. // Heart Lung. 2018. V. 47. № 3. P. 231–236. http s://doi.org/10.1016/j.hrtlng.2018.02.004
  6. Wawrzyńska M., Arkowski J., Włodarczak A., Kopaczyńska M., Biały D. Development of drug-eluting stents (DES). In: Functionalised Cardiovascular Stents, Ch. 3. Wall J.G., Podbielska H., Wawrzyńska M. (Eds.). Woodhead Publishing, 2018. P. 45–56. http s://doi.org/10.1016/B978-0-08-100496-8.00003-2
  7. Julio C., Palmaz M.D. // J. Vasc. Interv. Radiol. 2002. V. 13. № 2. P. 272–274. http s://doi.org/10.1016/S1051-0443(02)70172-3
  8. Kraak R., Grundeken M., Koch K., Winter R., Wykrzykowska J. // Expert Rev. Med. Devices. 2014. V. 11. № 5. P. 467–480. http s://doi.org/10.1586/17434440.2014.941812
  9. Dong J., Pacella M., Liu Y., Zhao L. // Bioact. Mater. 2022. V. 10. P. 159–184. http s://doi.org/10.1016/j.bioactmat.2021.08.023
  10. Mirhosseini N., Lin L., Liu Z., Mamas M., Fraser D., Wang T. // Heliyon. 2024. V. 10. № 5. e26425. http s://doi.org/10.1016/j.heliyon.2024.e26425
  11. Toong D.W.Y., Ng J.C.K., Huang Y., Wong P.E.H., Leo H.L., Venkatraman S.S., Ang H.Y. // Materialia. 2020. V. 12. 100727. http s://doi.org/10.1016/j.mtla.2020.100727
  12. Rocher L., Cameron J., Barr J., Dillon B., Lennon A., Menary G. // Eur. Polym. J. 2023. V. 195. 112205. http s://doi.org/10.1016/j.eurpolymj.2023.112205
  13. Li F., Gu Y., Hua R., Ni Z., Zhao G. // J. Drug Delivery Sci. Technol. 2018. V. 48. P. 88–95. http s://doi.org/10.1016/j.jddst.2018.08.026
  14. Liang J.J., Sio T.T., Slusser J.P. // JACC: Cardiovascular Interventions. 2014. V. 7. № 12. P. 1412–1420. http s://doi.org/10.1016/j.jcin.2014.05.035
  15. Arzhakova O.V., Arzhakov M.S., Badamshina E.R., Bryuzgina E.B., Bryuzgin E.V., Bystrova A.V., Vaganov G.V., Vasilevskaya V.V., Vdovichenko A Yu., Gallyamov M.O., Gumerov R.A., Didenko A.L., Zefirov V.V., Karpov S.V., Komarov P.V., Kulichikhin V.G., Kurochkin S.A., Larin S.V., Malkin A.Ya., Milenin S.A., Muzafarov A.M., Molchanov V.S., Navrotskiy A.V., Novakov I.A., Panarin E.F., Panova I.G., Potemkin I.I., Svetlichny V.M., Sedush N.G., Serenko O.A., Uspenskii S.A., Philippova O.E., Khokhlov A.R., Chvalun S.N., Sheiko S.S., Shibaev A.V., Elmanovich I.V., Yudin V.E., Yakimansky A.V., Yaroslavov A.A. // Russ. Chem. Rev. 2022. V. 91. № 12. RCR5062. http s://doi.org/10.57634/RCR5062
  16. Ferruti P., Bianchi S., Ranucci E., Chiellini F., Piras A. // Biomacromolecules. 2005. V. 6. № 4. P. 2229–2235. http s://doi.org/10.1021/bm050210+
  17. Rezapour-Lactoee A., Yeganeh H., Nasser Ostad S., Gharibi R., Mazaheri Z., Ai J. // Mater. Sci. Eng. 2016. V. 69. P. 804–814. http s://doi.org/10.1016/j.msec.2016.07.067
  18. Баикин А.С., Насакина Е.О., Мельникова А.А., Михайлова А.В., Каплан М.А., Сергиенко К.В., Конушкин С.В., Колмаков А.Г., Севостьянов М.А. // Перспективные материалы. 2023. № 10. С. 17–25. http s://doi.org/10.30791/1028-978X-2023-10-17-25
  19. Neslihan K., Aytekin A.Ö. Chitosan nanogel for drug delivery and regenerative medicine. In: Polysaccharide Hydrogels for Drug Delivery and Regenerative Medicine, Ch. 14. Giri Tapan K., Ghosh B., Badwaik H. (Eds.). Elsevier, 2024. P. 215–232. http s://doi.org/10.1016/B978-0-323-95351-1.00018-1
  20. Farnoush S.R., Sharifianjazi F., Esmaeilkhanian A., Salehi E. // Carbohydr. Polym. 2021. V. 273. 118631. http s://doi.org/10.1016/j.carbpol.2021.118631
  21. ГОСТ Р ИСО 10993.5-11 «Изделия медицинские. Оценка биологического действия медицинских изделий. Часть 5. Исследование на цитотоксичность: методы in vitro».
  22. ГОСТ Р ИСО 10993.12-15 «Изделия медицинские. Оценка биологического действия медицинских изделий. Часть 12. Приготовление проб и стандартные образцы».
  23. Poltavtseva R.A., Pavlovich S.V., Klimantsev I.V., Tyutyunnik N.V., Grebennik T.K., Nikolaeva A.V., Sukhikh G.T., Nikonova Y.A., Selezneva I.I., Yaroslavtseva A.K., Stepanenko V.N., Esipov R.S. // Bull. Exp. Biol. Med. 2014. V. 158. P. 164–169. http s://doi.org/10.1007/s10517-014-2714-7
  24. Baikin A.S., Nasakina E.O., Melnikova A.A., Mikhailova A.V., Kaplan M.A., Sergienko K.V., Konushkin S.V., Kolmakov A.G., Sevostyanov M.A. // Inorg. Mater: Appl. Res. 2024. V. 15. № 2. P. 352–357. http s://doi.org/ 10.1134/S2075113324020060
  25. Polyzois G.L., Hensten-Pettersen A., Kullman // J. Prosthet. Dent. 1994. V. 71. № 5. P. 505–510. http s://doi.org/10.1016/0022-3913(94)90191-0
  26. Shirosaki Y., Tsukatani Y., Okamoto K., Hayakawa S., Osaka A. // Pharmaceutics. 2022. V. 14. № 5. 1111. http s://doi.org/10.3390/pharmaceutics14051111

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Fig. 1. SEM image of a section of polysiloxane films: without the use of fillers [24] (a), made using sodium bicarbonate (b) [24], made using chitosan (c).

Download (239KB)
Indexing metadata
3. Fig. 2. Determination of the contact angle of polysiloxane films: without filler (a), produced using sodium bicarbonate (b), produced using chitosan (c).

Download (230KB)
Indexing metadata
4. Fig. 3. Metabolic activity of NCTC L929 cells according to the results of the MTT test during incubation for 24 hours with 3-day extracts from polysiloxane films: made using chitosan (sample 1) without the use of fillers (sample 2), made using sodium bicarbonate (sample 3).

Download (65KB)
Indexing metadata
5. Fig. 4. Appearance of mesenchymal stem cells (MSC) from human dental pulp (clone Th44) during incubation on the material 24 hours after seeding. Samples of polysiloxane films: made using chitosan (sample 1), without fillers (sample 2), made using sodium bicarbonate (sample 3). Sample K – Control. Stained with SYTO 9 (a), Hoechst 33342 (b) and PI (c). Scale bar 100 μm.

Download (368KB)
Indexing metadata

Copyright (c) 2024 Russian Academy of Sciences